1993 Jeep Grand Cherokee Suspension Track Bar Parts
Image
Product
Price
- Track Bar
- Includes Powdered-Metal Gusher Bearing To Allow Grease To Penetrate Bearing Surfaces
- MOOG DS1235 Track Bar
-
Features:
- Easy to install
- Restores like-new steering and handling
- OE fit and form geometry and alignment
- Construction and design validated by MOOG engineers
- Broad coverage for foreign and domestic applications
- Greaseable socket reduces corrosion and wear by allowing new lubricant to flush contaminants
- By constantly introducing design enhancements that extend product life and simplify installation and replacement, MOOG has earned its reputation as the chassis industry's Problem Solver.
This Part Fits the Following OEM/Substitute Numbers:
13-87905, 272-4194, 274-4194, 440-1099, 440-1099B, 45B1099, 46B1099A, 51235, 52007118, 52088432, 539-043, 62458005, 62558005, D1235, DS1235, DS1235E, DS1431, JTR101...VIEW MORE
Additional Fitment Information:
| Vehicle | Position |
|---|---|
| 1993 - Jeep Grand Cherokee | Front |
- Track Bar
- MOOG DS1235 Track Bar
-
Features:
- Easy to install
- Restores like-new steering and handling
- OE fit and form geometry and alignment
- Construction and design validated by MOOG engineers
- Broad coverage for foreign and domestic applications
- Greaseable socket reduces corrosion and wear by allowing new lubricant to flush contaminants
- By constantly introducing design enhancements that extend product life and simplify installation and replacement, MOOG has earned its reputation as the chassis industry's Problem Solver.
Additional Fitment Information:
| Vehicle | Position |
|---|---|
| 1993 - Jeep Grand Cherokee | Front |
- Left Hand Drive; w/0 in. Lift
- Track Bar; Left Hand Drive;
- Track Bar
- Product Attributes:
- WARNING CA Proposition 65: No
-
Features:
- Track Bar
- Crown Automotive is the premiere manufacturer and distributor of quality replacement parts for Jeep(R) CJ(TM), Wrangler(TM), Cherokee(TM), Grand Cherokee(TM), Liberty(TM), and Commander(TM). With over 8,000 different parts in stock for Jeep(R) vehicles from 1942 on up, Crown has the largest stock of replacement parts for Jeep(R) vehicles, including factory-discontinued parts. In fact, many of the older Jeeps are still on (and off) the road thanks to Crown parts. The Crown line consists of axle, body, brake, clutch, cooling, driveline, electrical, engine, exhaust, fuel, steering, suspension, transmission and transfer case components. Crown Automotive also offers an exclusive line of component kits and accessory products. Because we know that Jeeps are driven harder than most other vehicles, we emphasize offering only quality parts. In fact, we test parts on Jeeps before distributing them to our dealers to insure that they meet our standards for quality. Crown also supports its entire line with a 12 month/12,000 mile warranty to insure our dealers and their customers of our commitment to offering quality parts.
Additional Fitment Information:
| Vehicle | Position |
|---|---|
| 1993 - Jeep Grand Cherokee | Front |
- Includes Brackets and Hardware; 1.25 in. Dia.; w/0-3.5 in. Lift
- Adjustable Forged Track Bar; Includes Brackets and Hardware; 1.25 in. Dia.;
- Adjustable Forged Track Bar
- Product Attributes:
- WARNING CA Proposition 65: No
-
Features:
- Easy Bolt-On Installation
- Massive 1.25 in. Outside Diameter
- Made Of Forged Solid Steel For Unsurpassed Strength/Durability
- Nearly Double The Weight Of Your Factory Track Bar At 16-lbs
- Includes Clevite Brand Orem Style Rubber Bushings
- Fully Adjustable While Mounted On The Jeep For A Proper Fit
- Perfectly Center Your Jeeps Front Axle
- When youre way off the beaten path the last thing you should worry about is how youre getting home. Introducing Rough Countrys Forged Adjustable Track Bar for Jeep XJs, ZJs and MJs. This massive 16lb Track Bar is nearly twice the weight of your factory Track bar, offering you unparalleled support and the ultimate peace of mind in any driving situation.For those who are serious about flexing, crawling, and pushing your Jeep to the limits, Rough Countrys Forged Adjustable Track Bar is a must. This new track bar is made of forged steel and features rubber Clevite bushings and a beefy construction that will dwarf stock equipment. This design allows the bar to keep your axles tame even under pure off-road torture.Best of all, its simple to install and fully adjustable on the vehicle; meaning no removal required, no trial and error lining it up, and no more wasted time just to dial in your bar. All Rough Country forged Track Bars ship with a Lifetime Replacement Warranty.
Additional Fitment Information:
| Vehicle | Position |
|---|---|
| 1993 - Jeep Grand Cherokee | Front |
- Includes Brackets and Hardware; 1.25 in. Dia.; w/4-6.5 in. Lift
- Adjustable Forged Track Bar; Includes Brackets and Hardware; 1.25 in. Dia.;
- Adjustable Forged Track Bar
- Product Attributes:
- WARNING CA Proposition 65: No
-
Features:
- Easy Bolt-On Installation
- Massive 1.25 in. Outside Diameter
- Made Of Forged Solid Steel For Unsurpassed Strength/Durability
- Nearly Double The Weight Of Your Factory Track Bar At 16-lbs
- Includes Clevite Brand Orem Style Rubber Bushings
- Fully Adjustable While Mounted On The Jeep For A Proper Fit
- Perfectly Center Your Jeeps Front Axle
- When youre way off the beaten path the last thing you should worry about is how youre getting home. Introducing Rough Countrys Forged Adjustable Track Bar for Jeep XJs, ZJs and MJs. This massive 16lb Track Bar is nearly twice the weight of your factory Track bar, offering you unparalleled support and the ultimate peace of mind in any driving situation.For those who are serious about flexing, crawling, and pushing your Jeep to the limits, Rough Countrys Forged Adjustable Track Bar is a must. This new track bar is made of forged steel and features rubber Clevite bushings and a beefy construction that will dwarf stock equipment. This design allows the bar to keep your axles tame even under pure off-road torture.Best of all, its simple to install and fully adjustable on the vehicle; meaning no removal required, no trial and error lining it up, and no more wasted time just to dial in your bar. All Rough Country forged Track Bars ship with a Lifetime Replacement Warranty.
Additional Fitment Information:
| Vehicle | Position |
|---|---|
| 1993 - Jeep Grand Cherokee | Front |
- TOR offers the most comprehensible suspension parts on the market. The unmatched performance and robustness coupled with longer lasting components make our supension parts the go-to choice for thousands of mechanical shops in North America. Designed, tested and certified by TOR certified engineers.
- TOR
-
Features:
- TOR exclusive USA-engineered powdered metal gusher bearing design enables grease to flow through the bearing to the stud for reduced friction and enhanced strength and stability
- Premium cover plate design allows for tighter tolerances vs traditional cover plate designs, providing durability and extended part life
- TOR engineered steel composition results in a stronger component
- Full O.E. socket design with self-adjusting internal tension spring and high-strength polymer bearing
- Socket design allows new lubricant to flush contaminants from the assembly, reducing corrosion and wear
- Convenient easy access wrench flat allows for the use of a socket for easy installation and removal
- Forged, CNC-machined shell leads to high-quality, precision-made performance and additional strength
- Manufactured with CNC tooling, automated grinding and assembly lines for increased consistency
This Part Fits the Following OEM/Substitute Numbers:
2724194, 440-1099, 539-043, 74190001, D1235, DS1235, GDS1235, JTR101, MDS1235, TDS1235
Additional Fitment Information:
| Vehicle | Position |
|---|---|
| 1993 - Jeep Grand Cherokee | Front |
- Adjustable Front Track Bar
- Not compatible with right hand drive vehicles 1-3.5" Lift Vehicles with Dana 30 axle, aftermarket diff. cover and less than 3.0 in. lift may require bump stop adjustment to prevent interference
- Adjustable Front Track Bar | 1"-3.5" Lift | Wrangler TJ & LJ, Cherokee XJ, Comanche MJ, Grand Cherokee ZJ
- Product Attributes:
- California Proposition 65: ! Warning: Cancer And Reproductive Harm - Www.p65warnings.ca.gov
- Minimum Adjusted Length: 30.20
- Installation Time: 2-3
- Installation Difficulty: Moderate
- Maximum Adjusted Length: 33.20
- Title: Adjustable Front Track Bar
- Suggested Starting Length: 32.00
-
Features:
- Superior quality replacement for original fixed length panhard rod
- Variable length design properly aligns axle housing with chassis and prevents undue stress on related components
- Fine adjustment threads enable ultra precise axle positioning
- Extremely strong DOM tube construction utilizes OE bends for correct geometry and clearance
- Spherical urethane bushing for unrestricted travel and premium rubber bushing for comfort and quietness
- Zinc plated and powder coated for protection from corrosion and debris
- Improve handling on and off road with a JKS adjustable front track bar for the Jeep Wrangler TJ or LJ. Designed for Jeeps with 1-3.5" lift, JKS track bars controls lateral movement of the axle housing. They feature rubber and poly bushings to isolate noise and vibration. CNC bent DOM tubing is powder coated and zinc coated. Vehicles with Dana 30 axle, aftermarket diff. cover and less than 3.0 in. lift may require bump stop adjustment to prevent interference.
Additional Fitment Information:
| Vehicle | Position | Region |
|---|---|---|
| 1993 - Jeep Grand Cherokee | Front | United States |
- Adjustable Front Track Bar
- Not compatible with right hand drive vehicles 4"+ Lift Vehicles with Dana 30 axle, aftermarket diff. cover and less than 3.0 in. lift may require bump stop adjustment to prevent interference
- Adjustable Front Track Bar | 4"+ Lift | Wrangler TJ & LJ, Cherokee XJ & Comanche MJ, Grand Cherokee ZJ
- Product Attributes:
- California Proposition 65: ! Warning: Cancer And Reproductive Harm - Www.p65warnings.ca.gov
- Minimum Adjusted Length: 32.91
- Installation Time: 2-3
- Installation Difficulty: Moderate
- Maximum Adjusted Length: 35.91
- Title: Adjustable Front Track Bar
- Suggested Starting Length: 33.00
-
Features:
- Fits vehicles with more than 4" Lift
- Superior quality replacement for original fixed length panhard rod
- Variable length design properly aligns axle housing with chassis and prevents undue stress on related components
- Fine adjustment threads enable ultra precise axle positioning
- Extremely strong DOM tube construction utilizes OE bends for correct geometry and clearance
- Spherical urethane bushing for unrestricted travel and premium rubber bushing for comfort and quietness
- Zinc plated and powder coated for protection from corrosion and debris
- Correct front axle centering on your lifted Jeep Wrangler TJ or LJ by installing a JKS Adjustable Track Bar. For use with Jeeps with a 4" plus lift, JKS front track bars feature rubber and poly bushings to isolate noise and vibration. CNC bent DOM tubing is powder coated and zinc coated. Vehicles with Dana 30 axle, aftermarket diff. cover and less than 3.0 in. lift may require bump stop adjustment to prevent interference.
Additional Fitment Information:
| Vehicle | Position | Region |
|---|---|---|
| 1993 - Jeep Grand Cherokee | Front | United States |
- 1.25 in. Dia.; w/0-4 in. Lift
- Adjustable Forged Track Bar; 1.25 in. Dia.;
- Adjustable Forged Track Bar
- Product Attributes:
- WARNING CA Proposition 65: No
-
Features:
- Easy Bolt-On Installation
- Massive 1.25 in. Outside Diameter
- Made Of Forged Solid Steel For Unsurpassed Strength/Durability
- Nearly Double The Weight Of Your Factory Track Bar At 16-lbs
- Includes Clevite Brand Orem Style Rubber Bushings
- Fully Adjustable While Mounted On The Jeep For A Proper Fit
- Perfectly Center Your Jeeps Rear Axle
- Adjustable Forged Track Bar; 1.25 in. Dia.;
Additional Fitment Information:
| Vehicle | Position |
|---|---|
| 1993 - Jeep Grand Cherokee | Front |
Showing 1 - 9 of 9 products
Loading...